Features Steel Safety Toe – Steel toe exceeds impact and compression ASTM F2413-11 I/75 C/75 standards. Static Dissipative – Rated SD; falls in the range of 106-108 ohms to protect against the hazards of static build-up in the workplace. Details: Upper:  Water repellent leather Lining: Breathable leather; abrasion resistant Footbed: Half nubuck insole, padded in the heel area Sole: Ultralight polyurethane Toe Cap: Steel Sizes: 6-11, 12, 13 Wide CSA Classifications: CSA Z195-09 Grade 1 Protective Toecap CSA Z195-09 Static-Dissipative Protective Footwear Sole Characteristics: Slip Oil Metal Chips Heat Abrasion Chemical Excellent Very Good Very Good Excellent Excellent Good

STANDARD: CAN/CSA Z195-14 UPPER: high tenacity, extremely breathable AIRFREEDOM FABRIC nylon and MICROTECH EXTERNAL LINING: AIRFREEDOM Fabric INTERNAL LINING: 100% polyamide fabric, ladder-proof, antibacterial, breathable, it absorbs and releases the moisture, abrasion resistant FOOTBED: EVANIT, made of EVA and nitrile special compound, with high bearing capacity and variable thickness. Thermoformed, punched and coated with highly breathable fabric SOLE: polyurethane/TPU TOE CAP: non metallic TOP RETURN PLATE: non metallic APT PLATE - Zero Perforation with high electric resistance WIDTH: WIDE PLUS: abrasion resistant leather toe cap protection PERFORMANCES AND TECHNICAL FEATURES: 100% Non Metallic , Anti-torsion Support

The Cofra Heat Shield asphalt boots have a unique, totally flat Cofra sole which prevents stones, gravel and asphalt from accumulating in the tread. In addition, the flat sole avoids marking or digging into fresh asphalt. The top flap, which locks in place, protects the top of the foot from hot asphalt and covers the laces so that they don't become clogged with asphalt and tar. The new Heat Shield design protects the top of the foot from hot asphalt and repels heat, oil and stones. Heat Resistance of the sole tested for 8 hours at 212°F. The PU/Nitrile rubber sole is resistant up to 572°F (1-minute contact). Heat resistance in a sand bath (8 hours /212°F) - no damage to the footwear. Midsole: Heat Defender PU, a compound devised to prevent heat from passing through the sole into the shoe. It resists to 302°F for 30 minutes without its chemical-physical features being altered. Upper: Water Repellent printed leather Footbed: THERMIC INSOLE insulating against high temperatures.  The thermal comfort inside the footwear is made possible by the special PU compound devised to give high heat insulation. Puncture Resistant: Non-metallic APT (Anti Puncture Textile) fabric is flexible and built into the footbed. Puncture Resistant sole Heat Resistant sole Water Repellent Leather upper EH - Electrical Hazard compliant ASTM F2413-05 (ANSI I/C 75) Compliant Composite Safety Toe The Cofra Heat Shield Asphalt Boots have this additional safety feature: A protective leather tongue to protect laces from sparks. Seam made of 100% Kevlar fibre, with high melting point (842 °F), tencity and strength. The Heat Shield opens up fully to allow lace tying, but is held firmly in place with hook-n-loop tabs. The Heat Shield prevents hot asphalt from accumulating in the laces and top of the boot. The shield is not an official metatarsal guard, as it is intended to repel hot asphalt and gravel from the top of the foot and to protect the laces. Made in Albania CSA Classifications: CSA Z195-09 Sole Puncture Protection with a Grade 1 Protective Toecap CSA Z195-09 Electric-Shock Protective Footwear *Please refer to chart below for US to European sizing conversion* US 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 12 13 14 EU 39 39 ½ 40 41 41 ½ 42 43 43 ½ 44 44 ½ 45 46 47 48

CE certified Composite toecap for added protection Anti-static footwear Energy absorbing seat region Slip resistant outsole to prevent slips and trips on ceramic and steel surfaces Fuel and oil resistant outsole Dual density sole unit 100% non-metallic Protective composite toecap

Stylish and excellent S3 protection allows you to work in a variety of environments. Water resistant to maintain healthy feet in wet climates and a durable dual density, heat resistant outsole for comfort. CE certified Composite toecap for added protection Anti-static footwear Energy absorbing seat region Water resistant upper to prevent water penetration Slip resistant outsole to prevent slips and trips on ceramic and steel surfaces Heat resistant outsole - 300°C Fuel and oil resistant outsole Dual density sole unit 100% non-metallic Puncture resistant non-metallic midsole (PR) Protective composite toecap Lightweight Composite PU cushioned midsole

Features Steel Safety Toe – Steel toe exceeds impact and compression ASTM F2413-11 I/75 C/75 standards. Slip-Resistant Sole – Superb slip resistance thanks to the design of the outsole and to the closely located cleats, which guarantee grip both longways and horizontally. Static Dissipative – Rated SD; falls in the range of 106-108 ohms to protect against the hazards of static build-up in the workplace. Details: Upper:  Water repellent leather Lining: SANY-DRY breathable, antibacterial, abrasion resistant leather; absorbs and releases moisture Footbed: Full SOFT-BED, made of extremely soft, scented polyurethane; anatomic, removable, covered with cloth Sole: Slip resistant single density polyurethane Toe Cap: Steel Sizes: 5-9, 10 Wide CSA Classifications: CSA Z195-09 Grade 1 Protective Toecap CSA Z195-09 Static-Dissipative Protective Footwear Sole Characteristics: Slip Oil Metal Chips Heat Abrasion Chemical Best Very Good Very Good Excellent Excellent Best